Sharp DW-209EX, Руководство по эксплуатации

Страница: 20 / 24

20
General Reference
The temperature at which the unit can be op-
erated is 5
°
C to 35
°
C.
If the room temperature is over 35
°
C, the built-in protection system
will automatically turn off the unit. If the room temperature is below
5
°
C, water may freeze and cause a failure to the unit.
5
35
General Reference
In case of upward airflow “HIGH”
5
°
C to 35
°
C
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For a humidity of 80%
Room temperature (
°
C)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Press together
for 3 seconds
Fan speed/
LOW button
DRY CLOTHES
SETTINGS
button
No problem
Dehumidifying capacity (L/day)
Dehumidifying operation increases room
temperature.
The dehumidifier does not have a cooling function.
As the unit produces heat during operation, room tempera-
ture may actually increase by about 2
°
C to 5
°
C (depending
on the outdoor temperature and size of the room).
Dehumidification capacity will vary based
on room temperature and humidity.
Dehumidification capacity will increase as temperature rises (as
shown in the chart on the right).
Wait for 3 minutes before restarting the unit
If the unit is turned off, wait for at least 3 minutes before restarting operation.
If the unit is restarted immediately, the compressor will wait for 3 minutes to start up as part of the unit’s self-
protection system.
To shut off the tank full alarm
Follow the steps below to disable the tank full alarm:
1
Plug the power plug into the socket.
2
Simultaneously press the “DRY CLOTHES SETTINGS button” and
“Fan Speed/LOW button” for 3 seconds.
3
Remove the water tank. If the alarm does not sound, the proce-
dure is complete. If the alarm continues to sound, repeat the above
steps.
*
To restore the tank full alarm, unplug the power cord.
0
7
9
23
11
21
13
19
15
17
5 10 15 20 25 30 35