background image

15

FAST

STANDARD

GENTLE

AUTO DRY

ROOM DRY

CONTINUOUS

CLEAN AIR

DRY

SPEED

DRY CLOTHES

SETTINGS

ON / OFF

LOW

2

Pip

Lighting

FAST

STANDARD

GENTLE

Lighting

Defrosting

Operation indicator is lit on and is confirmed to be in operation.

To set off timer

 (it can be set when the unit is in operation)

1
2

If the room temperature is below 16

°

C, frost may form

on the cooling device of the dehumidifier, and the au-
tomatic defrosting function will automatically switch
on.

During defrosting, air flow is stopped and the sound of opera-
tion will change. (The defrost indicator will turn on during
defrosting.)

The length of time that defrosting will operate will vary accord-
ing to room temperature and humidity, but will be carried out
for 5 minutes at 45 minute intervals. (The duration of a defrost
cycle will be longer when the temperature is lower.)

(Example of indication)

 AUTO DRY operation at dehumidifying mode. (Indication of OFF TIMER  after 1 hour)

Timer setting button

Power ON/OFF
button

Operation

indicator

(Indicating the modes in
operation as they are.)

Press TIMER button

Indicating set-time of OFF TIMER as “OFF after 1 hour”.

Select set-time of TIMER since the TIMER shifts sequentially in order as follows. (one-hour interval)

No indication

 (set release)

The indication automatically shifts by continuously pressing Timer setting button.

The TIMER indicator figure will decrease sequentially by “1” following each 1 hour lapse after the
TIMER was set. (Example) shifts to 8 hours after 9 hours.

Example

Attention

 If you set OFF TIMER operation as “after 5 hours”,        

  The operation stops after 5 hours.

*

Dispose of water in  the tank before setting up the TIMER.
(When water in the tank reaches the FULL line, the operation stops and the remaining time also stops
its lapse.)

A melody sounds for 3 seconds when OFF TIMER is completed (when operation
has stopped).

After timer operation has been  set,  the shutdown time can be changed by  press-
ing the Timer setting button again.

To cancel Off Timer

You can cancel OFF TIMER by pushing TIMER button until no indication appears.

Содержание DW-209EX

























Отзывы: