Sharp DC500 - B/W Laser - All-in-One Скачать руководство пользователя страница 22

Страница: 22 / 248

Installing the Print Cartridges

Hold the toner cartridge by the handle
and insert it into the print
compartment.

•

Make sure the toner cartridge clicks
into place.

•

The handle can be left standing up.

Close the print compartment cover.

Reset the drum counter by pressing

(flip up the Rapid Key

overlay),

until DRUM COUNTER CLEAR is selected in the

display, and then

twice.

•

Note:

The toner counter automatically resets each time you replace the

toner cartridge. There is normally no need to reset the toner counter
manually. Should you find it necessary to manually reset the toner counter,

press

(flip up the Rapid Key overlay),

until TONER

COUNTER CLEAR is selected, and then

twice.

LIFE

START/
ENTER

LIFE

START/
ENTER

GREEN

BLUE

Note:

The print compartment cover may become noticeably warm if a large

number of pages are successively printed. This is normal and does not indicate a
problem in the machine.

all.book Page 20 Thursday, May 13, 2004 8:51 AM

Содержание DC500 - B/W Laser - All-in-One

























































































































































































































































Результаты поиска

Содержание DC500 - B/W Laser - All-in-One

Отзывы:

Sharp DC500 - B/W Laser - All-in-One, Сетевое руководство, Страница: 22 / 248

Результаты поиска

Содержание DC500 - B/W Laser - All-in-One

Отзывы: