Sharp DC500 - B/W Laser - All-in-One Скачать руководство пользователя страница 200

Страница: 200 / 248

Telephone Billing

198

Load the document (s).

•

If you are using Normal Dialing, press

or pick up an extension phone

connected to the same line.

•

SEND READY will appear in the
display.

Enter your number to access an outside line (max. of 3 digits).

Flip down the Rapid Key overlay and press

, enter the billing

code (max. of 9 digits), and then press

again.

•

Note: The code will appear as asterisks in the display and will not appear in
the Activity List or Transaction Report.

Press

and/or

to adjust the resolution and contrast if

desired.

Dial the other party by the desired method and transmit the document.

SPEAKER

Space

RESOLUTION

CONTRAST

all.book Page 198 Thursday, May 13, 2004 8:51 AM

Содержание DC500 - B/W Laser - All-in-One

























































































































































































































































Результаты поиска

Содержание DC500 - B/W Laser - All-in-One

Отзывы:

Sharp DC500 - B/W Laser - All-in-One, Сетевое руководство, Страница: 200 / 248

Результаты поиска

Содержание DC500 - B/W Laser - All-in-One

Отзывы: