XL-3000V
– 8 –
1
2
■
Setting the AC voltage selector
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into a wall socket. If necessary, adjust
the selector to correspond to the AC power voltage used in your
area.
Turn the selector with a screwdriver until the appropriate volt-
age number appears in the window (110 V, 127 V, 220 V or 230 V
- 240 V AC).
■
Connecting the AC power lead
After checking all the connections have been made correctly,
connect the AC power lead to the AC power input socket, then
into the wall socket.
Notes:
●
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
●
Never use a power lead other than the one supplied. Use of a
power lead other than the one supplied may cause an elec-
tric shock or fire.
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration
is used, connect the unit using the AC plug adaptor supplied with
the unit, as illustrated. The AC plug adaptor is not included in areas
where the wall socket and AC power plug can be directly connected
(see illustration ).
Wall socket
System Connections (continued)
System Connections (continued)
■
Setting the AM/FM interval
The International Telecommunication Union (ITU) has established
that member countries should maintain either a 10 kHz or 9 kHz
interval between broadcasting frequencies of AM stations and 100
kHz or 50 kHz for FM stations. The illustration shows the 50/9 kHz
zones (regions 1 and 3), and the 100/10 kHz zone (region 2).
This product is not equipped with a span selector. However, it will be
adjusted to a 9 kHz AM (50 kHz FM) interval when shipped from the
factory.
Before using the unit, be sure to set it to the AM/FM tuning interval
(span) used in your area.
To check the tuning span currently selected:
To change from a 9 kHz AM (50 kHz FM) interval to a 10 kHz AM
(100 kHz FM) interval:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "AM" appears on the display.
●
If "AM 531 kHz" is displayed, it means that AM stations have
been adjusted for a 9 kHz span and FM stations for 50 kHz
span. If "AM 530 kHz" is displayed, AM stations have been ad-
justed for a 10 kHz span and FM stations for 100 kHz span.
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Hold down the
button and the MEMORY/SET button for at
least 4 seconds. Release the buttons when "AM SP 10 kHz" and
"FM SP 100 kHz" are displayed alternately.
●
The clock display will reappear.
To return to a 9 kHz AM (50 kHz FM) interval:
Caution:
●
When the unit is left for a few hours after the span has been
switched and the AC power lead disconnected, the AM span will
be automatically returned to 9 kHz (FM span to 50 kHz). If this
happens, set the span again.
●
When the span is switched, all the memorised stations will be
cancelled.
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Hold down the
button and the MEMORY/SET button for at
least 4 seconds. Release the buttons when "AM SP 9 kHz" and
"FM SP 50 kHz" are displayed alternately.
●
The clock display will reappear.
