XL-3000V
– 6 –
OPERATION MANUAL
3
Within 1 minute, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY button.
Setting the Clock
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the CLOCK button and within 3 seconds, press
the MEMORY button.
2
Within 1 minute, press the PRESET ( or ) button to
select 24-hour or 12-hour display and then press the
MEMORY button.
"0:00"
The 24-hour display will appear.
(0:00
-
23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset.
When the 12-hour display is selected, "AM" will change auto-
matically to "PM".
4
Within 1 minute, press the PRESET ( or ) button to
adjust the minutes and then press the MEMORY button.
●
The hour will not advance even if minutes advance from "59"
to "00".
●
The clock starts from "0" second. (Seconds are not dis-
played.)
To confirm the time display when the power is on:
Press the CLOCK button.
The time display will appear for about 5 seconds.
Note:
The time will flash at the push of the CLOCK button when the AC
power supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the Clock" from the beginning.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents.
2
Perform "Setting the Clock" from the beginning.
Remote Control
■
Battery installation
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
Precautions for battery use:
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leak-
age.
battery terminals.
3
Replace the cover.
Caution:
●
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
●
Installing the batteries incorrectly may cause the unit to malfunc-
tion.
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AAA" size batteries (UM-
4, R03, HP-16 or similar).
●
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
●
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
●
Keep the remote control away from moisture, heat, shock, and
vibrations.
Troubleshooting
■
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
■
Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
2
Unplug the AC power lead from the AC INPUT socket on the
unit.
3
Whilst pressing down the MEMORY/SET button and the
but-
ton, plug the AC power lead into the AC INPUT socket on the
unit.
Caution:
●
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
●
After the above operation, interval span setting for AM will be
returned to 9 kHz (50 kHz for FM) automatically.
AC INPUT
