background image

E-9

 

Bluetooth

Bluetooth

 wireless technology is a short-range radio technology 

that enables wireless communication between various types of 

digital devices, such as mobile phone or computer. It operates 

within a range of about 30 feet (10 meters) without the hassle of 

having to use cables to connect these devices.

This unit supports the following:

Communication System: 

Bluetooth

 Specification version 2.1 

Bluetooth

 + Enhanced Data Rate (EDR).

Support Profile : A2DP (Advanced Audio Distribution Profile) 

and AVRCP (Audio/Video Remote Control Profile)

Notes when using unit with a mobile phone

 

This  unit  cannot  be  used  to  talk  over  the  telephone  even 

when  there  is  a 

Bluetooth

  connection  made  to  a  mobile 

phone.

 

Please refer to the operating manual supplied with the mobile 

phone for details on operation of your mobile phone while 

transmitting the sound using a 

Bluetooth

 connection.

Bluetooth

  devices  need  to  be  initially  paired  first  before 

they can exchange data. This unit can memorize up to a 

maximum of 20 devices. Once paired, it is not necessary to 

pair them again unless:

 

pairing is made with more than 20 devices. Pairing can 

only be made one device at a time. If subsequent de-

vice is paired, the oldest device paired will be deleted 

and replaced with the new one.

 

this unit is reset. All pairing information is deleted when 

unit is reset.

Indicators:

Indicator

Condition

Bluetooth

 status

Lights up

Connected

No indication

Unconnected

However,  the  indication  status  is  not  displayed  during 

Bluetooth

 standby mode.

 

Pairing with 

Bluetooth

 source devices

Press the   (ON/STANDBY) button to turn the power on.

Press the   button on the main unit or 

BLUETOOTH

 

/  button on the remote control to select Bluetooth 

function. “

BLUETOOTH

” appears on the display.

Perform pairing procedure on the source device to detect 

this  unit.  “CD-BH20  SHARP”  will  appear  in  the  detected 

devices  list  (if  available)  in  the  source  device.  (Refer  the 

source device operating manual for details).

Notes:

 

Place the devices to be paired within 3 feet (1 meter) of 

each other when pairing.

 

Some  source  devices  are  unable  to  display  lists  of  de-

tected devices. To pair this unit with the source device, 

refer to the source device operating manual for details.

Select  “CD-BH20  SHARP”  from  the  source  list.  If  Pass-

code* is required, enter “0000”.

Passcode may be called PIN Code, Passkey, PIN num-

ber or Password.

“Connected” appears on the display once the unit is suc-

cessfully paired with the source device. (Pairing information 

is now memorized in the unit.) Some audio source devices 

may connect with the unit automatically after pairing is com-

pleted, otherwise follow the instructions in the source device 

operating manual to start connection.

Press the play button on main unit, remote control or source 

device to start 

Bluetooth

 streaming playback.

Notes:

 

If a device such as microwave oven, wireless LAN card, 

Blue-

tooth

 device or any other device that uses the same 2.4 GHz 

frequency  is  placed  near  the  system  some  sound  interruption 

may be heard.

 

The transmission distance of the wireless signal between the de-

vice and the main unit is about 32 feet (10 meters), but may vary 

depending on your operating environment.

 

If a steel concrete or metallic wall is between the device and the 

main unit, the system may not operate at all, because the wire-

less signal cannot penetrate metal.

 

If this unit or the source device is turned off before 

Bluetooth

 con-

nection is completed, pairing will not be completed and the pair-

ing information will not be memorized. Repeat step 1 onward to 

start pairing again.

 

To pair with other devices, repeat steps 1 - 5 for each device. This 

unit can memorize up to a maximum of 20 devices. If subsequent 

device is paired, the oldest device paired will be deleted.

 

Once a device is ousted or deleted from the pairing list, the pair-

ing  information  for  the  device  is  also  deleted. To  listen  to  the 

sound from the device again, it needs to be re-paired. Perform 

steps 1 - 5 to pair the device again.

 

Some  music  applications  do  not  support 

Bluetooth

  Profile 

AVRCP 1.4, hence there will be no volume synchronization and 

no song information will be displayed even if your 

Bluetooth 

de-

vice supports such profile.

Listening to 

Bluetooth

 enabled devices

Содержание CD-BH20





















Отзывы: