Sharp CD-BH20, Руководство по эксплуатации

Страница: 16 / 20

E-15
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, AUDIO IN, LINE IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (“ ” indicator):
Once timer play works for one time only at a preset time.
Daily timer (“DAILY” indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
program, and use the daily timer to wake up.
1
Set the daily and once timer (page 15).
1 minute or more
Daily timer Once timer
Stop Start Start Stop
■
Timer playback
Before setting timer:
●
Check that the clock is set to the correct time (refer to
page 8). If it is not set, you cannot use the timer function.
●
For timer playback: Plug in USB or load discs to be
played.
1
Press the (ON/STANDBY) button to turn the power on.
2
Press the TIMER button.
3
Press the or button to select “Once” or
“Daily”, and press the ENTER button.
4
Press the or button to select “Timer
Set”, and press the ENTER button.
5
To select the timer playback source (CD, TUNER,
USB, AUDIO IN, LINE IN), press the or
button. Press the ENTER button.
When you select the tuner, select a station by press-
ing the or button, and then press the
ENTER button. If a station has not been programmed,
“No Preset” will be displayed and timer setting will be
canceled. To memorize a station, refer ‘Memorising a
station’ on page 14.
6
To adjust the day, press the or button
and then press the ENTER button.
7
Press the or button to adjust the hour,
and then press the ENTER button.
8
To adjust the minutes, press the or
button and then press the ENTER button.
9
Set the time to finish as in steps 7 and 8 above.
10
To adjust the volume, press the or but-
ton and then press the ENTER button.
11
Press the (ON/STANDBY) button to enter the power
standby mode. “TIMER” indicator lights up.
12
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during
timer playback.
13
When the timer end time is reached, the system will
enter the power standby mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
●
When performing timer playback using another unit
connected to the USB terminal or AUDIO IN or LINE
IN jack, select “USB” or “AUDIO IN” or “LINE IN” in
step 5. This unit will turn on or enter the power standby
mode automatically. However, the connected unit will
not turn on or off.
●
To stop the timer playback, follow step “ Cancelling
the timer setting ” of this page.
Checking the timer setting:
1
Turn the power on. Press the TIMER button.
2
Press the or button to select “Once” or
“Daily”, and press the ENTER button.
3
Press the or button to select “Timer
Call”, and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on. Press the TIMER button.
2
Press the or button to select “Once” or
“Daily”, and press the ENTER button.
3
Press the or button to select “Timer
Off”, and press the ENTER button. Timer will be can-
celed (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on. Press the TIMER button.
2
Press the or button to select “Once” or
“Daily”, and press the ENTER button.
3
Press the or button to select “Timer
On” , and press the ENTER button.
4
Press the (ON/STANDBY) button to enter the power
standby mode.
Timer and sleep operation (Remote control only)