Sharp AY-XPC12PHR, Инструкции по эксплуатации

Страница: 14 / 164

GB-12
SELF CLEAN operation will reduce the
growth of mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
.
1
Press the SELF CLEAN button when
the unit is not operating.
• The remote control will display “ ”.
(The “ ” will disappear automatically in
1 minute.)
• The green SELF CLEAN lamp ( ) and
the blue PLASMACLUSTER lamp on the
unit will light up.
• The unit will stop operation after 40 min-
utes.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp will
turn off.
NOTE:
• You cannot set the temperature, fan speed, air
fl ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.
SELF CLEAN OPERATION
1
VACANCY OPERATION
H e a t i n g o p e r a t i o n w i t h 1 0 ° C s e t
temperature will be performed to protect
your home and furniture from frost
damage, even when you are out.
1
Press the HEAT button to start
HEAT operation.
2
Press the VACANCY button.
• The remote control will display “ 10 °C °C ” .
TO CANCEL
Press the VACANCY button again.
• VACANCY operation will also be cancelled
when the operation mode is changed, or
when the unit is turned off.
NOTE:
• VACANCY operation is not available during
AUTO mode operation and in multi system.
1
2
A3AYXPC2PH_OPERATION_MANUAL_130105_10_langs.indb GB-12 A3AYXPC2PH_OPERATION_MANUAL_130105_10_langs.indb GB-12 2013-02-07 05:10:01 2013-02-07 05:10:01