Sharp AY-XPC12PHR, Инструкции по эксплуатации

Страница: 13 / 164

GB-11
ENGLISHENGLISH
TO CANCEL
Press the SET/C button.
• The yellow TIMER lamp ( ) will turn off.
• The current time will be displayed on the re-
mote control.
TIMER ON
1
Press the TIMER ON button.
• The TIMER ON indicator will blink.
2
Press the TIME ADVANCE or RE-
VERSE button to set the desired
time.
• The time can be set in 10-minute incre-
ments.
3
Press the SET/C button.
• The yellow TIMER lamp ( ) will light up.
4
Select the mode, temperature, and
fan speed as desired.
• Press below buttons to select mode:
: HEAT : COOL
: AUTO : DRY
• Press the TEMPERATURE button ( ▲ or
▼ ) to set the desired temperature.
• Press the FAN button to set the desired
fan speed.
CANCEL
TO CHANGE TIME SETTING
Cancel the TIMER setting, then set it
again
TO COMBINE TIMER ON AND
TIMER OFF
Timer on and timer off can be set up at
the same time
Set the TIMER OFF and TIMER ON. The
settings will be automatically com-
bined.
Example
(Current time: 9:00 p.m.)
OFF TIMER at 11:00 p.m.
ON TIMER at 7:00 a.m.
• The arrow ( or ) between the TIMER ON
indicator and the TIMER OFF indicator shows
which timer will activate fi rst.
NOTE:
• You cannot program the ON-TIMER and OFF-
TIMER to operate the unit at different tem-
peratures or other settings.
• Either timer can be programmed to activate
prior to the other.
NOTE:
• The unit will turn on prior to the set time to
allow the room to reach the desired tempera-
ture. (Awaking function)
1
3
2
AUTO SOFT LOW HIGH
A3AYXPC2PH_OPERATION_MANUAL_130105_10_langs.indb GB-11 A3AYXPC2PH_OPERATION_MANUAL_130105_10_langs.indb GB-11 2013-02-07 05:10:00 2013-02-07 05:10:00