manualshive.com logo in svg

Sharp AR M277 - B/W Laser - Copier, Руководство копировального аппарата

Многофункциональный копир Sharp AR M277 - лазерный черно-белый аппарат для копирования. Для получения бесплатного руководства по эксплуатации посетите manualshive.com и скачайте "Copier Manual" для вашего удобства. Получите доступ к полной информации о функциях и настройках этого устройства для повышения эффективности работы.

Поделиться
Скачать
background image

98

KEY OPERATOR PROGRAMS

SPEAKER VOLUME SETTING

This setting is used to adjust the volume of the 
following four types of sounds heard through the 
speaker.

• SPEAKER

• LINE MONITOR

• RINGER VOLUME • TRANSMISSION COMPLETE SOUND

To change a volume setting, touch the desired volume 
key.
The factory default setting is "Medium".

TRANSMISSION COMPLETE SOUND 
SETTING

This program is used to select the beep pattern that 
signals the end of transmission or reception. Touch 
[PATTERN 1], [PATTERN 2], or [PATTERN 3].
To listen to beep pattern, touch the [CHECK] key.
The factory default setting is "PATTERN 2".

TRANSMISSION COMPLETE SOUND 
TIME SETTING

This program is used to select the length of the beep 
that signals the end of transmission or reception. 
Selections are [2.0 sec], [2.5 sec], [3.0 sec], [3.5 sec], 
and [4.0 sec].
The factory default setting is "3.0 sec".

ACTIVITY REPORT PRINT SELECT 
SETTING

This setting is used to have an activity report 
automatically printed at regular intervals.
To have the report automatically printed every 50 
transactions (transmissions and receptions), select the 
[AUTO PRINT AT MEMORY FULL] checkbox. To have 
the report automatically printed at a specified time each 
day (only once a day), check the [PRINT DAILY AT 
DESIGNATED TIME] box and then select the time with 
the [HOUR] and [MINUTE] keys that appear.

Touch the [HOUR] key and then set the hour by touching 
the 

 and 

 keys. Set the minute in the same way. 

Touch [AM] or [PM] and then touch the [OK] key.

[AUTO PRINT AT MEMORY FULL] and [PRINT 
DAILY AT DESIGNATED TIME] can be 
simultaneously selected.
The factory default settings are as follows:

• AUTO PRINT AT MEMORY FULL: Disabled
• PRINT DAILY AT DESIGNATED TIME: Disabled

TRANSACTION REPORT PRINT 
SELECT SETTING

This setting is used to select the conditions for printing 
out Transaction Reports. Conditions can be selected 
for regular transmissions, broadcast transmissions, 
receptions, and confidential receptions.

 Touch the 

 key to display the next setting. Select the 

print conditions for receptions and confidential receptions.

The factory default settings are as follows:

• SINGLE SENDING: PRINT OUT ERROR REPORT 

ONLY

• BROADCASTING: PRINT OUT ALL REPORT
• RECEIVING: NO PRINTED REPORT
• CONFIDENTIAL RECEPTION: PRINT OUT NOTICE 

PAGE

KEY OPERATOR PROGRAMS

VOLUME ADJUSTMENT

SPEAKER

RINGER VOLUME

LINE MONITOR

OK

Low Medium High

Off

KEY OPERATOR PROGRAMS

ACTIVITY REPORT PRINT SELECT SETTING

AUTO PRINT AT MEMORY FULL

PRINT DAILY AT DESIGNATED TIME

OK

PM

AM

HOUR

MINUTE

13

01

• If you only select the PRINT DAILY AT 

DESIGNATED TIME setting and the 
number of recorded transactions exceeds 
50 before the specified time, each new 
transaction will delete the oldest 
transaction (the oldest transaction will not 
be printed).

• The activity report can also be printed out 

on demand. ("PRINTING REPORTS" 
(p.85))

Note

KEY OPERATOR PROGRAMS

TRANSACTION REPORT PRINT SELECT SETTING

PRINT OUT ALL REPORT

SINGLE SENDING

PRINT OUT ERROR REPORT ONLY

NO PRINTED REPORT

PRINT OUT ALL REPORT

BROADCASTING

PRINT OUT ERROR REPORT ONLY

NO PRINTED REPORT

OK

1/2

KEY OPERATOR PROGRAMS

TRANSACTION REPORT PRINT SELECT SETTING

PRINT OUT ALL REPORT

RECEIVING

PRINT OUT ERROR REPORT ONLY

NO PRINTED REPORT

PRINT OUT NOTICE PAGE

CONFIDENTIAL RECEPTION

NO PRINTED REPORT

OK

2/2

Содержание AR M277 - B/W Laser - Copier








































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AR M277 - B/W Laser - Copier

TDT RX6 Ultrasonic Recording Manual preview
RX6
Бренд: TDT Страницы: 15
Lexmark Jetprinter Disney Edition Z615 Series Quick Start Manual preview
Jetprinter Disney Edition Z615 Series
Бренд: Lexmark Страницы: 2
Olympus P-10 Instruction preview
P-10
Бренд: Olympus Страницы: 2
Oki MPS480mb Manual De L'Utilisateur preview
MPS480mb
Бренд: Oki Страницы: 197
Canon PIXMA TR4720 Online Manual preview
PIXMA TR4720
Бренд: Canon Страницы: 542
Konica Minolta Magicolor 7440 Installation Manual preview
Magicolor 7440
Бренд: Konica Minolta Страницы: 15
Xerox WorkCentre 3615DN Brochure & Specs preview
WorkCentre 3615DN
Бренд: Xerox Страницы: 4
AstroJet IB-9000-6P Operator'S Manual preview
IB-9000-6P
Бренд: AstroJet Страницы: 32
Olivetti d-Color MF1600 Service Manual preview
d-Color MF1600
Бренд: Olivetti Страницы: 204
Ricoh SP C222DN Administration Manual preview
SP C222DN
Бренд: Ricoh Страницы: 284
GCC Technologies Elite 21DN+ Getting Started Manual preview
Elite 21DN+
Бренд: GCC Technologies Страницы: 80
Canon imageCLASS LBP247dw Setup Manual preview
imageCLASS LBP247dw
Бренд: Canon Страницы: 32
Epson Stylus Photo RX640 series Basic Operation Manual preview
Stylus Photo RX640 series
Бренд: Epson Страницы: 56
Epson Stylus Photo PX830FWD Start Here preview
Stylus Photo PX830FWD
Бренд: Epson Страницы: 4
Epson Stylus Photo RX650 Brochure & Specs preview
Stylus Photo RX650
Бренд: Epson Страницы: 4
Epson TM-L500A Technical Reference Manual preview
TM-L500A
Бренд: Epson Страницы: 114
Epson Stylus Photo RX650 Specifications preview
Stylus Photo RX650
Бренд: Epson Страницы: 2
Epson Stylus Photo RX640 series Service Manual preview
Stylus Photo RX640 series
Бренд: Epson Страницы: 103

Бренды по названию

Популярные бренды

Загрузить еще бренды