Sharp AR-C360P, Руководство по обслуживанию

Страница: 47 / 180

Rev. 1
4 7 /
State
Count the drum rotation in a unit of
[Letter Paper Paper Interval
during continuous print].
Life: When printing a distance
equivalent to 26K sheets (3P/J).
Count the number of print dots.
Determine the usage level according to
the counter value.
(Refer to 2.16)
Convert the drum rotation into [Letter
Paper Distance Between
Paper Upon Continuous Printing].
One sheet of paper passing through is
counted as one on the counter.
Life: (1)When the counter value reached
80K or, (2)When reaching a 2000
count after detecting a Belt
Disposal Toner Near-Full state.
One sheet of paper passing through is
counted as one on the counter.
Life: When counter value is 80K.
Unit
ID
Toner Cartridge
Belt Unit
Fuser Unit
Life processing
Stop Printing
However, 500 sheets can be
printed by opening and
closing the cover.
Stop Printing
However, 20 sheets can be
printed by re-turning the
power back ON or
opening/closing the cover.
Stop Printing
However, 20 sheets can be
printed by re-turning the
power back ON or
opening/closing the cover.
Alarm (This unit can still be
used)
2.14 Reading Version of Routine Replacement Units
This determines whether the parts are new or old according to the I/D of the consumable parts that
are routinely replaced, the fuser unit, and the state of the fuse in the belt unit (good/dead). If the fuse
is in a conductive state, then it is considered a new unit. A NEW or OLD decision takes place when
the power is turned ON and when the cover is closed. When the part is NEW, the life counter of the
unit is reset, and the NEW/OLD decision-making fuse in each unit is cut.
2.15 Life Counter of Replaceable Units
The following Table lists the life counter of the I/D, fuser unit, and belt unit that are routinely replaced
consumable parts.
2.16 Toner Usage Level Detection
The toner usage level is detected by counting the number of dots printed. The counted number of
dots is written in in IC tip in a toner cartridge.
Once toner low is detected, the toner shall be considered empty after dot counting 1,050 A4 sheets
at 5%.
However, when the power is turned back ON, and the cover is opened and closed, the printer can
still print 20 more sheets.