Sharp AR-C260P, Руководство по эксплуатации

Страница: 37 / 78

CUSTOM SETTINGS
2-19
2
Setting items
■ ■ ■ ■
Tray settings
These settings are used to set the type of paper
used in each tray. For trays in which the paper size
slide is set to "EXTRA", these settings are also
used to specify the paper size. These settings are
explained in detail in "Setting the paper type
(except for the bypass tray)" on page 2-12 and
"Specifying the size when the paper size is set to
"Extra" (except for the bypass tray)" on page 2-13.
■ ■ ■ ■
Auto tray switching
This setting is used to enable automatic switching
between trays loaded with the same type and size
of paper. If one tray runs out of paper during
printing, printing will continue from the other tray.
■ ■ ■ ■
Print list
Printer setting list
●
This is used to print out a list of the machine
settings.
●
This shows the operation condition settings and
custom settings. The key operator program
settings are not shown.
PCL font list : List of fonts that can be used with the
PCL printer drivers.
PCL symbol set : List of PCL symbols.
NIC page : List of NIC (Network Interface Card)
settings.
PS font list : List of fonts that can be used with the
PostScript printer driver.
■ ■ ■ ■
Total count
The total number of pages printed can be
displayed and printed for each of the following
types of prints.
"COLOUR PRINTS", "B/W PRINTS", "DUPLEX",
"STAPLER", "OTHERS(COLOUR)",
"OTHERS(B/W)"
The counts that can be displayed and printed will
vary depending on the peripheral devices that are
installed.
■ ■ ■ ■
Clock
Clock adjust
Use this setting to adjust the date and time of the
machine’s built-in clock. The date and time are
used in functions that require date and time
information.
Daylight saving time setting
Use this setting to enable automatic adjustment of
the clock at the beginning and end of daylight
savings time.
NOTE
If list page printing is disabled with the "DISABLE
TEST PAGE PRINTING" key operator program
(page 20 of the Key Operator's Guide), the menu
"Print List" does not appear.