Sharp AR-C260P, Руководство по эксплуатации

Страница: 35 / 78

2-17
2
CUSTOM SETTINGS
The custom settings allow you to set the following parameters.
●
Tray settings ................................ Paper type and paper size* settings for each tray (see pages 2-11 and
2-14).
*The paper size setting is only used when a tray's paper size slide is set to "EXTRA". Be sure to set the paper type.
●
Auto tray switching ....................... This setting enables automatic switching between trays loaded with the
same type and size of paper. If one tray runs out of paper during printing,
printing will continue from the other tray. (See page 2-19)
●
Print list ........................................ Used to print a list of machine settings. (See page 2-19)
●
Total count ................................... The number of pages printed by the machine and optional equipment can
be displayed. (See page 2-19.)
●
Clock .............................................. Used to set the date and time of the printer's built-in clock. (See page 2-19)
Basic procedure for custom settings
1
Press the [MENU] key repeatedly until
"CUSTOM SETTINGS" appears.
Any print jobs held in the
printer and any jobs
currently being
transmitted to the printer
will be printed using the
previous custom
settings.
2 Press the [OK] key.
3 Press the or key to select the desired
setting.
4
Press the [OK] key.
5
Press the or key until the desired
selection for the setting appears.
For information on the selections for each setting,
see the explanations on page 2-19 and following.
6 Press the [OK] key.
" " will appear to the
right of the selection and
the selection will be
stored. Some settings
may require the
configuration of
additional parameters.
In this case, press the or until the desired
selection for the parameter appears and then
press the [OK] key to store it. To configure another
custom setting, press the [BACK/C] key and
repeat steps 5 and 6.
7
When you have finished configuring the
settings, press the [MENU] key to return to
the initial screen.
NOTE
The [BACK/C] key can be used to move back to the
previous setting level. This is useful if you
accidentally select the wrong setting.