Sharp AR-203E X Скачать руководство пользователя

Страница: 24 / 176

AR-203E/5420/M200/M201 UNPACKING AND INSTALLATION 5 - 4

8. Loading paper

1) Raise the handle of the paper tray and pull the paper tray out

until it stops.

2) Remove the pressure plate lock. Rotate the pressure plate

lock in the direction of the arrow to remove it while pressing
down the pressure plate of the paper tray.

3) Store the pressure plate lock which has been removed in step

2). To store the pressure plate lock, rotate the lock to fix it on
the relevant location.

4) Adjust the paper guides on the paper tray to the copy paper

width and length. Squeeze the lever of paper guide (A) and
slide the guide to match with the width of the paper. Move
paper guide (B) to the appropriate slot as marked on the tray.

5) Fan the paper and insert it into the tray. Make sure the edges

go under the corner hooks.

Note: Do not load paper above the maximum height line (

Exceeding the line will cause a paper misfeed.

6) Gently push the paper tray back into the unit.

9. Power to copier

Ensure that the power switch of the unit is in the OFF position.
Plug the other end of the power cord into the nearest outlet. Turn
the power switch on the left side of the unit to the "ON" position.
The start (

) indicator will light up and other indicators which

show the initial settings of the operation panel will also light up to
indicate the ready condition.

10. Software (AR-203E/M200/M201)

The CD-ROM that accompanies the machine contains the following
software:

MFP driver

Printer driver

The printer driver enables you to use the printer function of the
machine.

The printer driver includes the Print Status Window. This is a utility
that monitors the machine and informs you of the printing status,
the name of the document currently being printed, and error mes-
sages.

Please note that the Print Status Window does not operate when
the machine is used as a network printer.

Scanner driver*

The scanner driver allows you to use the scanning function of the
machine with TWAIN-compliant and WIA-compliant applications.

Sharpdesk* (Excluding AR-203E X)

Sharpdesk is an integrated software environment that makes it
easy to manage documents and image files, and launch applica-
tions.

Button Manager*

Button Manager allows you to use the scanner menus on the
machine to scan a document.

*: The scanning feature can only be used with computers that are

connected to the machine by a USB cable.

A. Before installation

Hardware and software requirements

Check the following hardware and software requirements in order to
install the software.

*1: Compatible with Windows 98, Windows Me, Windows 2000

Professional, Windows XP Professional, Windows XP Home
Edition or Windows Vista preinstalled model standardly
equipped with a USB port.

*2: Printing is not available in MS-DOS mode.

*3: The machine does not support printing from a Macintosh envi-

ronment.

*4: Administrator's rights are required to install the software using

the installer.

Installation environment and usable software

The following table shows the drivers and software that can be
installed for each version of Windows and interface connection
method.

*1: The printer driver that is installed will vary depending on the

type of connection between the machine and your computer.

Install the software according to the Operation Manual.

Pressure plate lock

Paper guide (B)

Paper guide (A)

Computer type

IBM PC/AT or compatible computer equipped
with a USB 2.0/1.1*

Operating
system*

Windows 98, Windows Me, Windows 2000
Professional*

, Windows XP Professional*

Windows XP Home Edition*

, Windows Vista*

Display

1024 x 768 dots (XGA) display with 16bit

Hard disk free
space

150 MB or more

Other hardware
requirements

An environment on which any of the operating
systems listed above can fully operate

Cable

Operating

system

Printer

driver

Scanner

driver

Button

Manager

Sharpdesk

USB

Windows 98/
Me/2000/XP/
Vista

Available*

Available

Содержание AR-203E X

















































































































































































Результаты поиска

Содержание AR-203E X

Отзывы:

Похожие инструкции для AR-203E X

Бренды по названию

Популярные бренды

Sharp AR-203E X, Руководство по обслуживанию

Результаты поиска

Содержание AR-203E X

Отзывы:

Похожие инструкции для AR-203E X

Бренды по названию

Популярные бренды