Sharp AR-160, Руководство по эксплуатации

Страница: 61 / 82

59
OPTIONAL
EQUIPMENT
Sort/group
If an optional electronic sorting kit is installed, the copier will have two
sorter modes for different copying jobs: one sorts copies into sets matching the sequence
of the originals and the second groups copies by originals.
The sort/group feature cannot be used with the dual page copy feature.
To change the SORT/GROUP mode, press the SORT/GROUP key to select the desired
mode.
●
The capacity of the paper output tray is 250 sheets (150 sheets if an optional job separator
tray kit (AR-TR2) is installed). When the number of copies output reaches this limit in
a sort or a group copy run, copying will stop, the output tray full (
) indicator will light
and the START key indicator will blink.
Remove the copies from the paper output tray and press the START key to resume
copying.
ELECTRONIC SORTING KIT (AR-EB3)
Electronic
sorting
kit
(AR-EB3)
Sort mode
Each set of copies will be sequentially delivered to the
paper output tray.
Group mode
All copies of the same originals will be grouped in the
paper output tray.
Offset stack (AR-161 only)
If the offset stack mode is enabled using user program
No. 19, each copy will be offset by approximately 25 mm.
When copying in the sort mode, each collated set of
copies will be stacked offset from the previous set.
When copying in the group mode, copies will be offset
and stacked in groups of multiple copies from the same
original.
If the offset stack mode is disabled, copies will not be
offset.
The offset stack mode is enabled in the factory default
setting.
1
2
3
1
1
1
1
2
1
Offset mode
1
1
2
3
1
Non-offset mode
1
2
3
3
2
1
3
2
1
3
2
1
1
2
3
3
3
2
3
2
1
1
1
2