36
GENERAL
INFORMA
TION
User
programs
USER PROGRAMS
The user programs allow the parameters of certain functions to be set,
changed, or cancelled as desired.
List of user programs
This copier has the following user programs.
Program No.
Program name
Description
1
Auto clear time
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
2
Preheat mode
Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 43.
3
Auto power shut-off
Sets the time that elapses before the copier enters the auto power
timer
shut-off mode after any operation is made. See page 43.
4
Stream feeding
Enables or disables the stream feeding mode when an optional
mode*
single pass feeder (SPF) is installed. See page 56.
5
Auto power shut-off
Enables or disables the auto power shut-off mode. See page 43.
setting
6
Border line for 2 in 1 or
Enables or disables the border line which is printed in 2 in 1 or 4 in 1 copy-
4 in 1*
ing when an optional electronic sorting kit and an optional SPF are installed.
See page 61.
7
Rotation copy*
Enables or disables rotation of original images. See page 58.
8
Auto paper select mode
Enables or disables the auto paper selection. See page 14.
9
Auto tray switching*
Enables or disables the automatic tray switching which occurs when paper
in a tray runs out. (This switching cannot switch to the bypass tray.)
10
Auditing mode
Enables or disables the auditing mode, which controls access to
copier. See page 13.
11
Account number
Registers accounts for auditing mode.
entry
12
Account number
Changes account numbers for auditing mode.
change
13
Account number
Deletes accounts for auditing mode.
deletion
14
Number of copies
Displays the total number of copies made against account numbers.
per account
15
Resetting account
Resets all audit accounts or resets any desired individual account.
16
Erase width adjustment*
Sets the amount of the edge erase and centre erase areas. See page 63.
17
Layout in 2 in 1 copy*
Selects a pattern for 2 in 1 copying. See page 61.
18
Layout in 4 in 1 copy*
Selects a pattern for 4 in 1 copying. See page 61.
19
Offset of paper output
Enables or disables the offset function of the paper output tray. The offset
tray
function can be specified respectively for the upper and lower areas
separated by an optional job separator tray kit. See page 59. (AR-161 only)
* These programs do not affect the copier functions unless certain optional equipment is installed.
Содержание AR-160
Страница 79: ......