shl23̲e̲02.fm
[21/39]
21
These precautions are provided to ensure that
performance can be fully demonstrated.
Thoroughly read these precautions to ensure correct use.
■
Precautions common to the main unit, internal
battery, charger, au Micro IC Card (LTE),
peripheral devices
Handling Precautions
●
Do not apply excessive force to the product during use. Be
sure not to put the product into a tightly packed bag or place
a heavy object on the product in a bag. Sitting on the product
in your pocket might damage the display or internal circuit
board resulting in a malfunction.
Keeping an external device connected to the external
connection jack might damage the connector resulting in a
malfunction. Such damage and malfunction are not covered
by the warranty, even if there is no external damage.
●
To ensure waterproof property (equivalent to IPX5 and IPX7)
of the product, use the product with the external connection
jack cover and au Micro IC Card (LTE)/microSD memory
card cover tightly closed.
Note that the waterproof property is not guaranteed in every
usage condition. Do not allow water to get inside the product
or splash water on the charger or optional accessories. Do
not open/close the external connection jack cover or au
Micro IC Card (LTE)/microSD memory card cover in the rain
or with water drops on the surface of the product. Doing so
might cause water intrusion resulting in internal corrosion.
Malfunctions determined to be caused by water intrusion are
not covered by the warranty.
●
Do not use the product in extremely hot, cold or humid
places. (Use within an ambient temperature range of 5°C to
35°C and humidity range of 35% to 85%.)
•
Charger
•
Conversion cables
●
Do not use the product in extremely hot, cold or humid
places. (Use within an ambient temperature range of 5°C to
35°C and humidity range of 35% to 85%. Using at a
temperature of 36°C to 40°C is allowed only when you use
the product temporarily.)
•
SHL23
•
au Micro IC Card (LTE) (inserted into the SHL23)
●
Do not use in places subject to lots of dust or vibration.
●
Clean the charger terminal and external connection jack on
the product, and connection jack on the desktop holder with
dry cotton swabs, etc. every now and then. A soiled terminal/
jack might cause poor connection. When cleaning them, do
not exert a strong force to prevent deformation.
●
Clean the product with a soft dry cloth (such as the type used
for eyeglasses). Forceful rubbing with a dry cloth may
scratch the display. The display may be stained if splash or
smear is left attached to the surface. Wiping the product
using alcohol, thinner, benzene, detergent, etc. might erase
the printing on the outer casing or cause discoloration.
●
Use as far away as possible from fixed-line phones, TVs and
radios. Use nearby might affect them.
shl23_e.book 21 ページ ２０１３年１１月２６日 火曜日 午後２時３３分
