shl23̲e̲03.fm
[50/53]
50
The followings are the explanation of how to charge the
internal battery by connecting the product to a USB
port of a PC through which the battery can be charged.
A
Connect the microUSB cable 01 (sold
separately) to a USB port of a PC after the
PC is activated completely.
B
Connect the microUSB cable 01 (sold
separately) to the product after the
product is activated completely.
■
Turning the Power On
A
f
(hold down for at least 2 seconds).
Charging with a PC
External
connection jack
USB port of a PC
microUSB cable 01
(sold separately)
Protruding edges
memo
◎
If you use the microUSB cable to charge the internal
battery, it may take the internal battery longer to be fully
charged than if you use the specified AC adapter (sold
separately).
◎
Turn the protruding side of the microUSB plug down and
insert the microUSB plug to the external connection jack of
the product straightly. Inserting the microUSB plug in the
wrong direction may result in damage to the external
connection jack of the product.
◎
The product is turned on when it is connected to a PC while
the power is turned off.
◎
If you charge the internal battery when the battery has run
out, the charging/incoming indicator may not illuminate. In
such case, use the specified AC adapter (sold separately)
for charging.
Turning the Power On/Off
memo
◎
The initial setting of the touch panel will be executed until
“AQUOS PHONE” disappears from the screen after the
power is turned on. Do not touch the screen, otherwise
touch panel operations may not be performed properly.
shl23_e.book 50 ページ 2013年11月26日 火曜日 午後2時33分