Sharp AQUOS SH-02L, Инструкция по эксплуатации

Страница: 75 / 242

„
Initial settings for docomo service
z
Alternatively, in the standby screen,
z
▶ [Settings] ▶
[docomo service].
1
When the Setting of docomo service
screen is displayed, [Start setting]
2
Make the initial settings
z
The setting items are as follows.
„
d ACCOUNT (
☞
P. 155 "d ACCOUNT password")
„
docomo location information
3
[OK]
Wi-Fi settings
If you use Wi-Fi function of the handset, you can use mail
or Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
Radio interference with Bluetooth devices
z
Wireless LANs (IEEE 802.11b/g/n) use the same
frequency band (2.4 GHz) as Bluetooth devices.
Therefore, using the wireless LAN device near a
Bluetooth device may cause radio interference,
lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth
device or keep the handset and the wireless LAN
device at least approximately 10 m away from the
Bluetooth device.
z
Packet communication is also available while [Wi-Fi] is
set to On. Wi-Fi connection is prioritized while Wi-Fi
connection is set, but the connection is automatically
switched to that of LTE/3G/GPRS network once Wi-Fi
connection is terminated. Note that packet
communication charges may be incurred in this case.
z
Refer to the instruction manual of your wireless LAN
base unit when using the access point at home etc.
z
Operate access point registration near the access
point.
z
If you use the docomo service by using Wi-Fi function,
set d ACCOUNT in advance. For details on d
ACCOUNT, refer to the DOCOMO website.
73
Before Using the Handset