Sharp AQUOS SH-02L, Инструкция по эксплуатации

Страница: 146 / 242

„
Using "Osaifu-Keitai compatible services"
z
To use Osaifu-Keitai compatible services, make
settings for services from Osaifu-Keitai app.
1
In the standby screen,
z
▶ [Osaifu-Keitai]
z
If the initial settings are not completed, the initial
settings screen appears. Follow the instructions on
the screen and operate.
2
Select a service
z
Make settings of the app service.
3
Set up a service
z
Make settings from an app or website of the
service.
4
Hold the
b
mark of the handset over the
scanning device
mark
z
You can use the services by holding the handset over
the scanning devices without activating Osaifu-Keitai
compatible app.
z
Communicating with the scanning device is available
even if you turn the power off. However, you may not
be able to use it if the power remains turned off for a
long time, the battery level is insufficient or a certain
period of time has passed after turning the power on.
z
After turning the power on, restarting the handset or
updating software, unlock the [Screen lock] before
holding the handset over the scanning device and
then use an Osaifu-Keitai compatible service.
z
If sp-mode was not subscribed to, please note that
some of the functions of Osaifu-Keitai compatible
services might no longer be able to be used.
„
Precautions about holding over the other
device
z
Pay attention to the following points when holding the
a mark over the other device such as a scanning
device or device into which an NFC module is built.
„
Do not let the handset strongly clashed with the
other device but slowly bring the handset close to
the other device when holding the
b
mark over it.
„
Hold the
b
mark over the center of the other device
and in parallel with it. If the other device does not
recognize the built-in IC card even when you do so,
slightly move the handset away from the other
device or move the handset around.
144
Tools/Apps