Sharp AQUOS LC-32BX5H, Руководство по эксплуатации

Страница: 28 / 50

27
Useful adjustment settings
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
2
3
Press
a
/
b
to select “Child Lock”, and then
press ENTER .
5
6
Enter the 4-digit number as a password using
0 – 9 .
Press
a
/
b
to select “Change Password”,
and then press ENTER .
Enter the same 4-digit number as in step 6
to confirm.
7
NOTE
• To view a locked channel you must enter a password.
When you select a locked channel, a password prompt
message pops up.
• When no password is input for 20 seconds after the prompt
message is displayed, the TV goes into standby mode.
Press
c
/
d
to select “Setup”.
If you already set the password, enter it here.
Change Password
Channel Setting
Reset
New Password – – –
Reconfirm – – – –
–
Change Password
Channel Setting
Reset
New Password – – –
Reconfirm – – – –
–
4
– – – –
Setting a channel
Press
a
/
b
/
c
/
d
to select the channel that
you wish to apply the Child Lock, and then
press
ENTER .
• The Child Lock setting becomes effective only
when the TV is turned off after the Child Lock is
applied.
Press
a
/
b
to select “Channel Setting”, and
then press ENTER .
Press
a
/
b
to select “Yes”, and then press
ENTER .
Yes
No
Change Password
Channel Setting
Reset
Repeat steps 1 to 4 in Setting a password .
1
2
3
4
NOTE
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut it
out and keep it in a safe place that children cannot
reach.
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Resetting the password
Allows you to reset your password.
Press
a
/
b
to select “Reset”, and then press
ENTER .
Press
a
/
b
to select “Yes”, and then press
ENTER .
Repeat steps 1 to 4 in Setting a password .
Yes
No
Change Password
Channel Setting
Reset
2
3
1
Password setting for child lock
(for TV input mode)
Allows you to use a password to protect certain settings
from being accidentally changed.
LC-BX5H(E)-f 06.7.24, 9:07 AM 27