23
LC-26GA5E
LC-32GA5E
LC-26GA6E/LC-26BV6E
LC-32GA6E/LC-32BV6E
LC-37GA6E
ADC MAN
COLOUR
0
GAIN
234
OFFSET 127
SOURCE
0
GA6 VX.XX
ExpX
PxW Exp X.X LCD VXX
ADC MAN Menu
Manual adjust of PixelWorks Analog Digital Converter. Only for look the adjustment value.
(It is recomended do not
modify)
Press END button to return to the previous menu.
Use the up / down arrows to select a term in the
menu.
Confi rm the selection with
OK.
Use the up / down arrows to change values.
Use the left / right arrows to change between pa-
rameters.
BRI CTR OUT Menu
Brightness and contrast output that affects to OSD and picture at the same time
.
Use the up / down arrows to select a term in the
menu.
Confi rm the selection with
OK.
Use the up / down arrows to change values.
Use the left / right arrows to change between pa-
rameters.
Press END button to return to the previous menu.
WBALANCE
COLOUR
0
LO
033
HI
175
GAMMA MODE
COPY
OFF
GA6 VX.XX
ExpX
PxW Exp X.X LCD VXX
WBalance Menu (It is recomended for WB adjust use GAMMA CONST Menu).
White Balance adjust of TV mode. Before to carry out the White Balance Adjustments, it is requested to achieve
the Common bias and ADC adjustments in this order.
LO / HI:
adjusting points to 20% and 80% of colour saturation.
Adjustment
Input 1, 2 or 3 video input terminal.
Pattern: White 20%.
Brightness and contrast: Dynamic settings.
Change LO value in «COLOUR 0» (red) and «COLOUR 2» (blue) in order to become the reference value. Re-
peat as far as reference level is required.
Do not change green colour (1). It must be as default value.
Change pattern White 80%.
Change HI value in «COLOUR 0» (red) and «COLOUR 2» (blue) in order to become the reference value. Re-
peat as far as reference level is required.
Do not change green colour (1). It must be as default value.
GAMMA MODE:
Differentiate between two types of gamma.
(It is recomended do not modify)
Source 3: Component 1080i.
Input component signal.
Pattern: Grey scale, 10 steps.
Format: 1080i / 60Hz.
Use the up arrow menu to select source 3. Confi rm the selection with OK. Use the up arrow menu to select ADC.
Confi rm the selection with OK. Off is fl ashing. Touch the up arrow one time, and the adjust made automatically.
www.ma163.com 电子技术资料网