Sharp Aquos LC-108D1U, Руководство по эксплуатации

Страница: 40 / 46

38
Appendix
Troubleshooting
Problem Possible Solution
No power • Check if you pressed
MONITOR POWER
on the remote control unit.
(See page 16.) If the indicator on the LCD Monitor does not light up, press
POWER
on the LCD Monitor.
Is the AC cord disconnected? (See page 8.)
Has the power been turned on? (See page 16.)
Has the main
POWER
been turned ON? (See page 8.)
•
•
•
•
Unit cannot be operated. • External infl uences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after fi rst turning off the power of
the LCD Monitor or unplugging the AC cord and replugging it in after 1 or 2
minutes. •
Remote control unit does not
operate. • Is the
FUNCTION
set correctly? Set it to the LCD Monitor setting position.
Are batteries inserted with polarity (
e
,
f
) aligned? (See page 9.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fl uorescent lighting?
Is a fl uorescent light illuminated near the remote control sensor?
•
•
•
•
•
Picture is cut off/with sidebar
screen. • Is the image position correct? (See page 26.)
Are screen mode adjustments such as picture size made correctly? (See
page 20.) •
•
Strange color, light color, or color
misalignment • Adjust the picture tone. (See pages 23 and 24.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the input signal setting. (See page 26.) •
•
•
Power is suddenly turned off. • Is the sleep timer set? (See page 17.)
Check the power control settings. (See page 25.)
The unit's internal temperature has increased. Remove any objects blocking
vent or clean. •
•
•
No picture • Is connection to other components correct? (See pages 13 to 15.)
Is correct input signal source selected after connection? (See page 31.)
Is the correct input selected? (See page 31.)
Is picture adjustment correct? (See pages 23 and 24.)
Is "On" selected in "Audio Only"? (See page 31.)
Is a non-compatible signal being input? (See page 15.) •
•
•
•
•
•
No sound • Is the volume too low? (See page 17.)
Is "Variable" selected in "Output Select"? (See page 31.)
Have you pressed
MUTE
on the remote control unit? (See page 17.)
Are the speakers connected correctly? (See page 7.)
•
•
•
•
The LCD Monitor sometimes
makes a cracking sound. • This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the LCD
Monitor's performance. •
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or
near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature:
f
4°F to
e
140°F (
f
20°C to
e
60°C)
•
•
LC-108D1U̲E̲05.indd 38 LC-108D1U̲E̲05.indd 38 2008/04/14 17:57:57 2008/04/14 17:57:57