Sharp AN-LS1, Руководство по эксплуатации

Страница: 42 / 55

42
Setting
Setting of computer data communication port number and search port number.
1
Click “Setting”.
|
“Setting” dialog will be displayed.
2
Enter “Search Port” number and “Data Port” number and click “OK”.
Search Port : Enter port number used for searching AN-LS1. (1025 to 65535)
Data Port
: Enter port number used for communicating with AN-LS1. (*1025 to 65535)
* Values to be entered vary according to the environment setting of the computer. For details,
contact your network administrator.
•
In cases such as when “network security monitoring software” is installed on the computer, or
when a firewall has been installed on the network system, it may be impossible to communicate
using the current search port number. In this case, please change the port number for search
and/or specify the range of data port numbers. There may be cases where the data ports have
been used by OS or other software, so specify a wider range of data ports.
Downloaded from: http://www.usersmanualguide.com/