Sharp AN-LS1, Руководство по эксплуатации

Страница: 19 / 55

19
Setup
User Name Setting ([4]User Name)
Carrying out security protection using user name.
setup>4
User Name :
Please Enter : an-ls1
(change) —> an-ls1
•
User name can be up to 8 characters.
•
In the initial state, user name is not set.
Password Setting ([5]Password)
Carrying out security protection using password.
setup>5
Password :
Please Enter : sharppj
(change) —> sharppj
•
Password can be up to 8 characters.
•
In the initial state, the password is not set.
RS-232C Baud Rate Setting ([6]RS-232C Baud Rate)
Setting of baud rate for RS-232C (CONTROLLER and PROJECTOR) terminals.
setup>6
note: It sets both RS-232C (CONTROLLER) and RS-232C (PROJECTOR).
0 ... 9600 bps
1 ... 38400 bps
2 ... 115200 bps
Baud Rate Select[0-2] :1
RS-232C Baud Rate : 38400 bps
•
Baud Rates for the RS-232C (CONTROLLER) terminal and the RS-232C (PROJECTOR) terminal
cannot be set to different values.
Display set user name.
Enter user name and press the
return key.
Enter “4” and press the return key.
Display set password.
Enter password and press the
return key.
Enter “5” and press the return key.
Display set baud rate.
Select and enter the number 0, 1,
or 2 and press the return key.
Enter “6” and press the return key.
Downloaded from: http://www.usersmanualguide.com/