Sharp AL 2030 - B/W Laser - Copier Скачать руководство пользователя

Страница: 67 / 92

B: Misfeed in the fusing area

Lower the fusing unit release
lever.

Gently remove the misfed paper
from under the fusing unit as
shown in the illustration. If the
paper cannot be removed, proceed
to "C: Misfeed in the transport
area".

Raise the fusing unit release lever and then close the side
cover by pressing the round projections near the side cover
open button. The misfeed (

) indicator will go out and the start

(

) indicator will light up.

The fusing unit is hot. Do not
touch the fusing unit when
removing misfed paper. Doing
so may cause a burn or other
injury.

• Do not touch the surface (green portion) of the drum cartridge

when removing the misfed paper. Doing so may cause
smudges on copies.

• Do not remove the misfed paper from above the fusing unit.

Unfixed toner on the paper may stain the paper transport
area, resulting in smudges on copies.

Fusing unit release lever

AL-2030_2040CS.book 65 ページ２００７年４月６日　金曜日　午前１１時３２分

Содержание AL 2030 - B/W Laser - Copier





























































































Результаты поиска

Содержание AL 2030 - B/W Laser - Copier

Отзывы:

Похожие инструкции для AL 2030 - B/W Laser - Copier

Бренды по названию

Популярные бренды

Sharp AL 2030 - B/W Laser - Copier, Руководство по эксплуатации

Результаты поиска

Содержание AL 2030 - B/W Laser - Copier

Отзывы:

Похожие инструкции для AL 2030 - B/W Laser - Copier

Бренды по названию

Популярные бренды