l
l
Be sure that your headphones have a 3.5 mm
diameter
plug and are between 16 ohms and 50
ohms impedance.
The recommended impedance is 32 ohms.
When headphones are connected, the speakers are discon-
nected automatically. Adjust the VOLUME control for desired
volume.
(Audio signal) input
To listen to or record signals from external sources
through this unit:
l
Use an RCA lead to connect the desired external unit to the
sockets.
(red right channel, white left channel)
When using video equipment (Laser Disc player, VCR), be
sure to connect the audio output to this unit and the video
output to a television.
Set the ON/STAND-BY switch to ON.
Press the
button.
Operate the external unit.
To record the sound from the external unit, perform steps 2
4 of the “Recording from the built-in radio” section on page
13.
Note:
To prevent hum interference, do not place this unit near tele-
vision receivers.
1 5
Before you move this product to a new location, proceed as
follows:
1
l
Set the ON/STAND-BY switch to ON.
Press the CD button.
Press the OPEN/CLOSE button to open the disc tray.
Remove all CDs inserted in the unit.
Press the OPEN/CLOSE button to close the disc tray.
Make sure that “NO DISC” is displayed.
Set the ON/STAND-BY switch to STAND-BY, and then unplug
the AC power lead from the AC socket.
