DISC SKIP
DISC SKIP
APSS
(Auto Program Search System)
RANDOM
APSS automatically locates the beginning of any track.
n
Random play
(Remote control operation)
The tracks on the disc can be played in random order
automatically.
1 Load the CD(s) and close the disc tray.
Press the RANDOM button to begin random play.
l
will appear.
To cancel
random play:
Press the button.
will go out.
Note:
When using random play, be sure to press the
(CD
n
) button, or switch off the power when you
have finished listening.
Otherwise, the disc will play continuously.
n
Disc number selection
1
When stopped, press the DISC SKIP button.
Press the button.
The next disc playback will begin, after which each following
disc will be played sequentially.
Notes:
When the DISC SKIP button is pressed during playback, play-
back will begin automatically from the next disc. (It is not
necessary to press the
button.)
When one of the disc number buttons
is pressed
during playback, play back of the selected disc will begin auto-
matically. (It is not necessary to press the button.)
To listen to the track being played again:
Press the
button for less than 0.5 seconds during playback.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To skip a number of tracks at one time, press the
or
button repeatedly until the desired track number is shown.
To start playback from a desired track, press the
or
button whilst in the stop mode to select the track number,
and then press the
button.
Note:
APSS can only search for music on a single disc.
n
Cue and review
4
1
Load the CDs and begin playback.
Hold the
button down for audible fast forward, and hold
the
button down for audible fast reverse.
Normal playback will resume when the
or
button is
released.
Note:
If the end of the disc is reached whilst cueing, “END” will
appear on the display. (Even though the next disc has been
loaded, the disc will not be switched.)
Press the
button for fast reverse or press the
n
(CD
n
)
button to stop CD operation.