420 774 335 397 www.sharks-shop.cz Stránka 22
FUNCTION SUPER POWER
- This function serves for the need for short-term maximum power
- The maximum power of 190 A when pressing the super button is approximately 3 minutes.
- When reusing the function, the time delay must be at least 10 minutes due to the cooling of the
machine
- Do not overload the machine to prevent it from being damaged
MAINTENANCE
- Only qualified personnel may operate the unit.
- Always unplug the unit and wait for the fan to stop. Inside the device there is high voltage and
currents that endanger life.
- It is recommended to regularly remove the device cover and vacuum dust with compressed air at low
pressure. At the same time, check the contact state with an isolated tool.
- Check the cables regularly. Cables should not have cracks or cuts.
- Do not allow metal particles to penetrate into the machine, may cause a short circuit.
During shipment and storage of the welding machine, try to protect it from moisture. It is
recommended to store the welding machine in a dry and well-ventilated place and not subject to high
humidity, corrosive gases and dust.
After opening the packaging, it is recommended to re-wrap the welding machine if it is intended for
transport or storage.
