420 774 335 397 www.sharks-shop.cz Stránka 18
Dear customer,
Thank you for purchasing the Sharks Welding Machine, model Super power IGBT 190A. Your new
welding machine was manufactured by Steen QOS, s.r.o., to meet the demands of high standards,
operational reliability, ease of use and user safety.
With proper care, it will provide you with stable and reliable performance. If you use it properly and
only for the purpose of hobby use, you will enjoy years of safe operation.
NOTICE
Before using your new SHARKS product, read this Owner's Manual carefully.
Pay special attention to all WARNINGS and WARNINGS.
Your SHARKS product has many features to make your work easier and faster.
When developing this product, great attention has been paid to safety, operation
and reliability, with a view to simple maintenance and operation.
GENERAL SAFETY INSTRUCTIONS
Electric shock can lead to death!
●
Contact with live components may result in death due to electric shock or
burns.
●
Set the grounding according to the standards used.
●
It is forbidden to touch electrical parts and electrodes without working
protection (welding gloves or clothing).
●
Contact with live components may result in death due to electric shock or burns.
●
Output voltage of the device when idle is dangerous. Do not touch the components that are under
the current.
●
Before starting up, make sure that the instrument and the base material are grounded.
●
Turn off the power and unplug the power cord while installing and repairing the device.
●
Welding cables with insufficient performance and damaged or old insulation must not be used.
●
Wear dry and well-insulated work gloves.
●
Do not operate the unit if its cover has been removed.
●
If you are using the device in a narrow or Very high, work with protective aids.
●
When the welding is complete, turn off the power.
●
Do not use the appliance in rain or in places with relatively high humidity.
Weld in a well-ventilated room!
●
The welding area must be well ventilated.
●
Use a belt or chain to attach the gas bottle to the instrument. The gas
bottle must stand on a level ground.
●
Protect the gas bottle from heat, sunlight and rain. Dangerous, eg
flammable objects should not be stored near the device.
●
Use sufficient ventilation with forced circulation or local exhaust (forced
suction) on the arc to remove vapors.
Arc is dangerous to eyes and skin!
• Use a suitable welding helmet and light filter, wear a suitable welding
protective garment with long sleeves, trousers and work shoes or a leather
apron.
• We recommend using a welding helmet or a welding helmet. A protective
fence.
Fire hazard!
Do not heat near flammable materials or where the atmosphere may contain
flammable dust, gas or liquid vapors.
