s h a r kcl e a n . co m
s h a r kcl e a n . co m
ASSEMBLY
SETTINGS
1
2
3
5
6
4.
For compact storage, hang the handheld
vacuum from the
Storage Hook
on the wand.
5.
Remove
Odor Neutralizer Technology
Dial
from bag. Flip up the dial handle, align
the teal arrows, then insert the dial into the
nozzle.
* More detailed odor neutralizer technology assembly instructions and visuals on the following
two pages.
6.
To lock and engage the dial, rotate it
counterclockwise until it clicks into the
desired odor intensity setting.
1.
Insert
Wand
into
Floor Nozzle
.
2.
Insert
Handheld Vacuum
into wand.
3.
Snap the
Onboard Storage Clip
onto the
wand, then place accessories in the holder.
Ensure all connections click securely into place.
(Snap)
(Click)
(Click)
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use the Carpet setting.
NOTE:
Select Carpet for stuck-on dust and debris.
Power Button
Press the Power button to begin
vacuuming. Press again to turn
off power. Press the FLOOR TYPE
button to toggle between Bare
Floor and Carpet settings.
Carpet
Press the FLOOR TYPE button to
switch to Carpet setting. The brushrolls
spin faster to pick up debris below the
surface of your carpets.
CONTROLS
The control panel is located on the
back of the handheld vacuum.
POWER BUTTON
Bare Floor/Small Area Rugs
When powered on, the vacuum will
be in Bare Floor setting. In this setting,
the brushrolls spin slowly to clean bare
floors and small area rugs.
BARE FLOOR SETTING
CARPET SETTING
4
(Turn to
Click)
