16
sharkclean .com
ENGLISH
15
sharkclean .com
IMPORTANT:
Clean the dust screen
inside the dust cup as required�
NOTE:
Empty dust cup when debris
reaches the MAX fill line�
MAINTAINING YOUR VACUUM
EMPTYING THE DUST CUP
1
Press the Wand Release button on
the top of the wand to disconnect
it from the handheld vacuum�
OR
Remove the dust cup from the
handheld vacuum by squeezing the
two Dust Cup Release buttons on
both sides of the base at the same
time and pulling it out�
2
Hold dust cup over a trash bin and
press the Empty button on the front
of the dust cup� The bottom lid will
open, allowing the debris to fall out�
3
Once dust cup is empty, close the
bottom lid and insert dust cup back
into handheld vacuum until you it
clicks into place�
RECOMMENDED FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XPMFK320
Clean once a month�
Post-Motor Filter
Clean once a year�
1084FTV320
CLEANING THE FILTERS
1
Pre-Motor (foam and felt):
Lift the latch on the top of the
handheld vacuum to open the filter
cover� Take out filters and tap loose
dirt off them� If more cleaning is
needed, rinse filters with water only
and let them air-dry completely�
To reinstall them, insert the felt
filter first, place the foam filter on
top of it, and close the filter cover�
2
Post-Motor:
Lift off the post-motor filter cover
below the handle of the handheld
vacuum� Remove the filter, rinse it
with water only, and let it air-dry
completely� Replace the filter, then
close the cover, pressing it until it
clicks into place�
Foam
Felt
Empty
Dust Cu
p
Release
