10
TOLL FREE:
1-800-798-7398
11
www.sharkclean.com
English
when the unit is on, the Wrinkle
Eraser
™
bar gets very hot. Use
the steam guard on the bottom
of the frame to remove safely.
The small steam bonnet should
be attached to the unit at all
times during usage. Remove
the steam bonnet when the
unit has cooled for cleaning
only. The bonnet is permanently
attached to the bonnet frame
and should never be removed
from it.
To remove the small steam
bonnet, remove the frame on
the unit if one is in place, then
gently pull on either side of
the steam bonnet and pull the
bonnet frame off the unit.
To reattach the bonnet, gently
snap the frame over the steam
nozzle and press gently to lock
in place (
Fig. 5
).
Using the Press & Refresh
horizontally:
8
The Press & Refresh can be
used to deodorize, sanitize, and
refresh upholstered items: sofa,
baby bedding, mattress, car
seat, drapes, and more.
9
Attach the upholstery/delicate
frame and upholstery pad to the
unit.
10
In a horizontal position, move
the steamer continuously over
the upholstered item.
CAUTION:
The Wrinkle Eraser
™
is hot. Use caution when
removing the frames. DO NOT
put your hands directly onto the
Wrinkle Eraser
™
.
WARNING:
Never steam any
article of clothing while it is
being worn.
the Wrinkle Eraser
™
directly
onto the fabric.
CAUTION:
Do not over tilt the
unit when steaming overhead.
CAUTION:
Do not hold the
unit in a fixed position on
delicate fabrics and upholstered
items.
5
The vertical press pad has two
web hooks on either side. You
can use these hooks to position a
garment for better results and a
larger pressing are when steaming
sleeves. Use caution when holding
the sleeves of garments while
steaming (
Fig. 4
).
6
When steaming lightweight
garments, pants and skirts
you can use the Velcro
™
clips
to hold the garment on the
vertical pressing pad.
7
When finished using the Fabric
Steamer, turn the appliance
“Off” and let it cool before
emptying the water tank and
removing the bonnets and
frames.
Using Your Press & Refresh
™
Attaching the accessories:
3
Choose your desired frame. The
point of the frame should be
pointed down. Attach the top
flat area of the frame to the
unit and then gently push the
pointed end of the frame on
securely. (
Fig. 2
)
When using the
upholstery/
delicate fabric frame:
4
Attach the desired bonnet to
the frame, then attach the
frame to the unit. Pull the
2 tabs on either side of the
bonnet over the top of the
frame and secure the bottom
of the bonnet to the frame
using the bottom tab (
Fig. 3
).
Then attach the frame to the
garment steamer as described
above (
Fig. 4
).
IMPORTANT:
Use caution
when changing the frames
Using the Press & Refresh
™
and
vertical press pad:
1
Hang the vertical press pad on
a door. (
Fig. 1
)
2
Hang the garment that is to
be steamed onto the garment
hook on the vertical press pad.
(
Fig. 2
)
3
Once the selected accessory is
placed on the fabric steamer,
turn the On/Off switch to the
“On” position, a blue LED
light will illuminate (
Fig. 3
).
It will take approximately 1
minute for the unit to heat up
and be ready for steaming and
pressing.
4
Holding the fabric steamer in
the vertical position with the
steam nozzle pointing away
from you,
press and hold the
steam trigger
for continuous
steam and begin steaming
your garments in a vertical or
horizontal motion. Begin at the
top of the garment and move in
a downward direction pressing
Filling and refilling the water
reservoir:
1
Never fill the fabric steamer
while it is plugged into an
electrical outlet. Disconnect the
power cord before refilling.
2
Open the water cap and hold
the fabric steamer horizontally
and fill using the filling flask
provided. Be careful not to
overfill. Replace the cap by
pushing it in making sure that it
closes firmly. (
Fig. 1
)
NOTE:
The water tank does not
have to be completely full for
the fabric steamer to generate
steam. However, make sure
that the water tank is at least
half way full for optimal results.
Hold the steam trigger
for continuous steam.
The steam will stop
emiting once you let
go of the button.
Intermittently wipe away
condensation from the
steam guard with extended
use
Practice makes perfect! It
takes time to get used to
and master the garment
steaming techniques.
Always
check the fabric
labels for recommendations
from the manufacturer.
Test the fabric in an
inconspicuous part of the
garment such as an inner
seam.
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Fig. 3
GS500_series_IB_ES_100616.indd 10-11
10-06-16 11:46 AM
