Shannon HRP 220, Руководство пользователя

Страница: 28 / 50

User’s Guide
HRP 220 - 27 -
HS
Maintenance
The machine requires very little maintenance. Occasionally
remove loose dirt from the machine and brush it clean.
10.1 SAFETY MEASURES
1.
Switch off the main switch (switch A ).
2.
Clear the working surface.
3.
Disconnect the compressed air.
4.
Remove the plug from the socket.
10.2 LUBRICATION POINTS
The following points should be lubricated with a drop of oil or
grease once a year:
10.2.1 Cylinder bearing: bottom.
To reach the lubrication point remove a frame plate on the rear
or side of the machine.
10.2.2 Cylinder bearing: top.
To reach the lubrication point remove the control units next to
the central support.
(See Section
12 .)
10
Bearing
Bearing