BK-T680 User’s Manual
47
5)
Refer to the following figure, to replace the paper roll.
Figure appendix 3.1-12 Replacing paper roll
2.
Adjusting metal paper roll shaft module
Refer to the following figure, unscrew the screw and adjust the paper guide of cantilever paper
holder in the axial direction to adapt to 48-82.5mm width paper.
Figure appendix 3.1-13 Adjusting cantilever paper holder width
Refer to the following figure, turn the green paper near end sensor spanner to adjust the position
of paper near end sensor. The paper near end sensor has 4 levels, and the default level is Level
1.
