BK-T680 User’s Manual
44
Appendix 3.1-4: Adjusting cantilever paper holder
1.
Adjusting plastic paper roll shaft module
1)
Refer to the following figure, the paper guide of cantilever paper holder can rotate around the
paper roll shaft. Make sure the arrowhead on paper guide is upward after installing the cantilever
paper holder.
Figure appendix 3.1-7 Adjusting paper guide of cantilever paper holder
2)
Refer to the following figure, the paper guide of cantilever paper holder can be adjusted to meet
paper of width from 48mm to 82.5mm via rotating the thumb wheel.
Figure appendix 3.1-8 Adjusting cantilever paper holder width
3)
There are scale marks on paper roll shaft of cantilever paper holder, and the scale mark position
where paper guide locates indicates the corresponding paper width. In the following figure, it
indicates the corresponding paper width is 82.5mm.
