FERTILIZER BROADCASTER
Making Agriculture More Economical
29
11.4 Propeller Shaft
Disconnect the drive shaft from the tractor and slide
apart.
Clean and coat the inner tube of the drive shaft with a
light film of grease on daily basis or every 8 hours of
work and then reassemble.
Clean the greasing nipple (A) of the cross and shear bolt
yoke from mud of other residuals before using them for
inject lubricating grease. Lubricate with Lithium base
grease as shown in the picture.
11.5 Gear Box
Clean the greasing nipple (A) of the
gearbox from mud of other residuals
before
using
them
for
injects
lubricating grease. Lubricate with
Lithium base grease as shown in the
picture.
11.6 Replacing the spreading vanes
The spreading vanes are made of especially wear resistant material. Nevertheless, we remind you
that the spreading vanes are wear parts. Replace the spreading vanes as soon as holes from
abrasion or damage are visible.
Note:
It is essential to ensure that the spreading vanes are installed correctly. The open
side of the U shape spreading vane must be facing the direction of rotation.
Follow the steps mentioned below:
•
Unscrew the nut (A) and replace with
new vane
•
The fixing items (nuts and bolts) must
be of same type of those prescribed by
the manufacturer.
•
Tighten the nut with a tool at proper
torque.
A
A
A
A
Fig. 11.2
Fig. 11.1
Fig. 11.3
Содержание Fertilizer Broadcaster
Страница 1: ...O P E R A T O R S M A N U A L FERTILIZER BROADCASTER OM 2011 Rev 01 2015...
Страница 14: ...5 WARNING Hand Hazard Wait until all machine components have completely stopped before touching them...
Страница 27: ...FERTILIZER BROADCASTER 27 Making Agriculture More Economical 10 5 Spreading Chart Fig 10 6...
