Shaktiman Fertilizer Broadcaster, Руководство оператора

Страница: 25 / 36

FERTILIZER BROADCASTER
25
Making Agriculture More Economical
10.0 ADJUSTMENTS
10.1 Loading the Hopper
Do not load the hopper over the edge to avoid the loss of fertilizer during the work and travel.
10.2 Spreader Disc Vane Adjustment
4 Blades are on the disc, adjustable in 4 different
positions to allow an optimal distribution
depending on the type of product and working
conditions.
When all the vanes are put in hole 1 (Fig 10.1), the
distribution of the product is increased toward left,
compared to the way of the tractor moving. On the
contrary, if the vanes are put in hole 4, the
distribution will be bigger toward right.
Moving the vanes from position 1 to position 4, at
the same speed, there will be an increase of the
distributing width of fertilizer distribution.
10.3 Setting the Spread Rate
The fertilizer is guided through the two openings
from the split hopper onto the spreading disc. This
opening is adjusted with the lever A and B (Fig.
10.2)
Before any adjustment, check that by putting the
lever in the fully closed position, the bottom
opening of the hopper is fully closed by the shutter
(C). If not then adjust the position of the shutter on
the tie rod (D) through nut (E). (Fig. 10.2)
See the rate chart (Fig. 10.6) for setting to the correct opening number, which is based on the
tractor speed, fertilizer type and spread width.
Move the lever (A & B) along the graduated scale and lock it in the chosen position with the pin.
1
4
D
A
B
C
E
F
Fig. 10.1
Fig. 10.2