Shaktiman Fertilizer Broadcaster, Руководство оператора

Страница: 18 / 36

!
7.3 Universal Propeller shaft Attachment
Warning: Length of propeller shaft is very important and requirement may vary from
tractor to tractor. Please read section Universal propeller shaft length adjustment.
During propeller shaft installation, push the pushpin (1) then
slide one end of propeller shaft over the tractor’s splined
PTO shaft and secure with locking device(push pin) 1 of
drive shaft. Do the same process for the other end of the
Propeller shaft.
Propeller shaft now be moved back and forth to ensure that
it is secure on the PTO shaft of the tractor and implement
gearbox.
Note:
The till of the universal propeller shaft must
not exceed 35
o
. (Fig. 5)
7.4 Detaching Implement from the Tractor
•
Detaching the equipment from tractor is reverse
procedure of attaching the equipment.
•
First lift down the equipment on the level ground
and lower the stand and lock the stand so that equipment should not erect after detaching
from tractor.
•
Remove propeller shaft, followed by top link, then LH lower link and RH lower link of
tractor.
7.5 Universal Propeller Shaft Length Adjustment
IMPORTANT:
•
The propeller shaft which will be used to operate the machine must definitely have
protective covers.
•
Propeller shaft without protective covers should never be used.
•
The tractor may not be running during the mounting and dismounting of the shaft.
•
No other persons should be around the propeller shaft during processes with the shaft.
Attention: The universal propeller shaft supplied, with the machine, is of standard length.
Therefore it might be necessary to adapt the universal drive shaft.
Make sure the PTO shaft length is compatible with the different working positions of the
implement. If the PTO shaft is too long it might bend and damage may occur to the tractor or
implement.