SGS MD-1200-1, Руководство пользователя, Страница: 19 / 27

USING THE DEVICE
The LIFE DEVICES:
When using the recommended conditions, the lifetime of the device 10 years .
Instruction manual
The device before first use, the outer surface dipped in warm soapy water, cleaned with a
cloth wrung.
Turn the power switch
Thermostat (250 ° C-300 ° C) set. (Green light will illuminate).
Products may occur when you run an odor originating from the first insulation and heating
elements.
Therefore, all run before starting to use the thermostat to 250 ° C for
45 minutes to bring
the product as hollow.
Place pizza to be cooked after the flashing green light
Pizza cooking time is about 7-8 min at about 280 ° C.
You can check if cooked and cooked with the pizza burning lamp switch means.
Open the lid after cooking pizza and you get pizza. Close the lid again.
Although your cutting power to the furnace in order to save on a short waiting time during
use, the thermostat take hold, bringing to 90 ° C. (If the oven's power is cut off due to the
cold to go to a sufficient temperature for the next cooking process will result in a loss of
time and energy.)
After daily use, turn off the power switch. Do the cleaning of the device after a power loss.
Operation of the device at temperatures b 5 ° C to +40 ° C and maximum
humidity of 65% is recommended that ambient conditions.
PERIODIC MAINTENANCE AND CLEANING
Consumers must be made by:
The device before first use and after each use and later (without electrical devices) starting
from the complete outer surface of the platinum hair, wipe it with a sponge and liquid
cleaning agent.
spirit of salt during cleaning, the elves etc. Do not use any cleaning material.
CLEANING AND MAINTENANCE
19