SGS MD-1200-1, Руководство пользователя, Страница: 12 / 27

SAFETY WITH DETAILS
☞
Solid and liquid combustible materials of all kinds in the area
where the device is working (clothing, alcohol and derivatives,
petro - chemical products, wood and plastic, curtains, etc.) should
not be taken.
☞
You can use our devices together with our other products in
the same series.
☞
Do not clean with pressurized water.
☞
It is established in accordance with the regulations in force,
and this device should be used only in a well-ventilated area.
Refer to the device's facility and instructions before use.
☞
Apart from the manufacturer or its authorized service
should not interfere with the device.
☞
The area in which the device is used without any reason to panic
in case of fire flames flare (if any) to use the fire extinguishers closing
the gas valve and power switch. Never use water to extinguish the
flames.
☞
The device operating voltage 380 V 400 V 380-400 V
3 NPA
~ / 50/60 it is Hz. Do not use a power supply voltage other than
that.
☞ Electrical connections to supply insurance against the danger of
leakage current of 30 mA leakage current must be performed by
placing insurance.
☞
If the supply cord is damaged in a Y type connection, the cord
must be replaced by the manufacturer or its service agent or a
similarly qualified personnel in order to prevent a hazardous situation.
☞
This device is not intended for use by persons with physical,
sensory or mental capabilities (including children) or persons with
inadequate experience or knowledge, unless supervision and
management are concerned with the use of the device by a person
responsible for the safety of the device
12