SGS MD-1200-1, Руководство пользователя, Страница: 13 / 27

HANDLING AND RELOCATION
The device should never be operated under the hood.
solid and liquid combustible materials of all kinds in the area where the device is working
(clothing, alcohol and derivatives, petro - chemical products, wood and plastic, curtains, etc.)
should not be taken.
Do not clean with pressurized water.
This device must be installed in accordance with current regulations and should be used only in
a well-ventilated area. Refer to the device's facility and instructions before use.
The device should be used only by employees who have received training about the device is
made for industrial use.
The area in which the device is used without any reason to panic in case of fire flames flare (if
any) to use the fire extinguishers closing the gas valve and power switch. Never use water to
extinguish the flames.
a wall of the device compartment, kitchen furniture to be positioned close to the decorative
covering VB.N if their coating is made from fireproof material, or a suitable non-combustible
heat-insulating material the distance of 5 cm, otherwise must be at least 20 cm. It is
recommended attention to obey the rules of fire protection.
set the device to be placed under the bench and set foot on the plane of the device operation
should be in balance.
electrical connection of the device must be checked by a qualified electrician, floor max. 170
cm in height must be connected to insurance.
Electrical connection; To supply insurance against danger of leakage current of 30 mA leakage
current should be done like putting insurance.
nearest grounding bar connected to the grounding of the electrical wiring of the device must be
provided on board.
13