SGM PALCO 3+, Руководство пользователя

Страница: 7 / 18

Please don't project the beam onto combustible substances.
Fixtures cannot be installed on combustible substances, keep at more than 50cm distance from
the wall for smooth air flow, so there should be no shelter for the fans and the ventilation for heat
radiation.
If the external flexible cable or cord of this luminance is damaged, it shall be replaced only by the
manufacturer or his service agent or an as well qualified person in order to avoid a hazard.
Please be aware that damages caused by manual modifications to the device are not subject to
warranty. Keep away from children and non-professionals.
GENERAL GUIDELINES
This device is a lighting effect for professional use on stages, in discotheques, theaters, etc.
This fixture can be operated with the max alternating current which is stated in the technical
specifications in the last page of this manual, the device was designed for indoor and outdoor use
.
The lighting effects are not designed for permanent operations. Consistent operational breaks
may ensure that the device will properly function for a long time.
Do not shake the device. Avoid brute force when installing or operating the device.
The device shall only be used together with its protective shield.
While choosing the installation-spot, please make sure that the device is not exposed to extreme
heat, moisture or dust. The minimum distance between the projector light-output and the
illuminated surface must be more than 0.1 meter.
Operate the device only after having familiarized with its functions. Do not allow operations by
not qualified persons to operate the device. Most damages are the result of unprofessional
operations.
Please use the original packaging if the device is to be transported.
For safety reasons, please be aware that all modifications on the device are forbidden.
If this device will be operated in any way different from what is described in this manual, the
item may be damaged and the guarantee becomes void. Furthermore, any other operation may
lead to short-circuits, burns, electric shocks, lamp explosions, crashes, etc.
INSTALLATION INSTRUCTIONS
Mounting the device