SGM PALCO 3+, Руководство пользователя

Страница: 6 / 18

white color, press again, the white color will die out (it depends on whether this function
exists in the lighting fixture).
press this button to the full amber color brightness, press ENTER to dim the
white color, press again, the amber color will die out (it depends on whether this function
exists in the lighting fixture).
Notice: press the buttons of the colors you want to mix+ NUMBER button or UP/DOWN+
ENTER to mix the colors.
+
：
press this button to increase the value.
—
：
press this button to decrease the value.
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to keep this condition and ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
If the device has been exposed to sudden changes in temperature due to environmental changes,
do not switch it on immediately. The arising condensation might damage the device. Leave the
device switched off until it has reached the room temperature.
This device falls under protection-class I. Therefore it is essential that the device is earthed.
The electric connection must be carried out by qualified personnel.
Don't move the device when is set in the operation mode.
Make sure that the available voltage is not higher than stated at the end of this manual.
Make sure the power cord is never crimped or damaged by sharp edges. In this case, the cable
replacement must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it. Handle the
power cord only by the plug. Never pull out the plug by tugging the power cord.