28
Product Version 1.0 | Revision A | Released 2022-4-21
LED ENGINE
The i-6
features 24 high-power LEDs, and is available in RGBW or in single color temperature White. The
i-6 RGBW
version can be operated in RGB calibrated mode which ensures that colors are compatible across the range of SGM
fixtures. The i-6 RGBW also offers the ability to operate in RAW mode with full control of each color.
Color temperature correction (RGBW version only)
The i-6
offers seamless CTC (color temperature correction) control from 2000° Kelvin - 10000° Kelvin.
Ultra high-speed strobe effect
The ultra high-speed strobe effect generates random strobe and pulse effects with variable speed.
Beam angle
The i-6 has two available beam spreads, 2.3º or 3.4º.
INDIVIDUAL FIXTURE SETTINGS
Setting the dimming curve
Setting the dimming curve will determine the fixture’s behaviour, when changing the light intensity between 0% -
100%.
Linear control provides uniform adjustment throughout the control action, whereas gamma corrected dimming pro
-
vides finer control at low light levels, where the eye is more sensitive to change. By default, the
i-6
uses gamma cor
-
rected dimming. For a uniform response, set all fixtures to the same dimming curve.
Flipping the OLED display
If the fixture is installed hanging upside down, it is useful to flip the display so that it is easier to read.
To flip the display, press ENTER and select SETTINGS → FLIP DISPLAY, or press the up and down buttons on the control
panel at the same time.
Setting the OLED display saver (POI n.a.)
By default the OLED display dims down after a short period when the control panel is not in use. The display can also
be set to turn off completely, ideal when a pitch-black environment is required. Pressing any key will always turn on
the display or restore it to normal brightness.
To configure the display settings, press ENTER → SETTINGS → DISPLAY SAVER.
NOTE: To avoid the risk of display deterioration caused by long term usage, it is recommended to select the setting →
DISPLAY OFF.
Setting the fan mode
For operating environments where low-noise is a requirement, or where the fixture will be operating in high tempera
-
tures, it is possible to adjust the default fan speed by going to SETTINGS → FAN MODE in the menu.
PLEASE NOTE! IN POI FIXTURES, FAN MODE ADJUSTMENT IS DONE THROUGH RDM
FIXTURE PROPERTIES
FACTORY DEFAULT
When restoring the i-6
to the factory defaults, the follow
-
ing settings will be set:
•
DMX address = 1
•
DMX mode = Default mode (6 channel)
•
Startup mode = DMX
•
Display saver = Off
•
Flip screen = Off
•
RDM device label set to = Fixture type name
•
Internal program reset
