33
Product Version 1.0 | Revision A | Released 2022-4-21
ACCESSORIES
The i-2 Series features two different types of optional anti-glare
shields:
•
Full anti-glare shield - covers the full fixture’s opening
•
Half anti-glare shield - covers half of the fixture’s opening
Using the anti glare shields will remove any unwanted glare and
reflections.
The anti glare shields are easily mounted by removing the two tilt
lock bolts, one in each side of the fixture. Refit the anti glare shield
in position and screw both tilt locks bolts again.
NOTE: THIS ACCESSORY IS SUITABLE FOR BOTH PERMANENT
OUTDOOR AND INDOOR INSTALLATIONS.
For further information and other possibilities see www.sgmlight.
com or contact your local SGM dealer.
SGM VACUUM TEST KIT
The Vacuum Test Kit is an accessory suitable for all SGM IP-rated
fixtures, made for testing the IP integrity upon reassembly.
In order to ensure the IP-rating of the
i-6
Series, it’s highly recom
-
mended that the fixture is always vacuum tested after installing or
swapping any part that might compromise the IP-rating, e.g.,
swapping the front lens.
SGM disclaims liability for any damage occasioned by the non-use,
or inability to use, the vacuum test kit after reassembling the fix
-
ture.
USB - XLR UPLOADER CABLE
The SGM USB to DMX cable is an accessory used mainly to update
the fixture with the latest SGM firmware. See below how to update
the fixture with the latest firmware.
The SGM Uploader cable is also used for controlling the DMX val
-
ues channel by channel through the Firmware Uploader Tool soft
-
ware (available for download at www.sgmlight.com).
Figure 21: SGM Vacuum Test Kit
Figure 22: SGM Uploader Cable
ANTI-GLARE SHIELDS
Figure 20.2 : i-2 Series Anti-glare shields
Figure 20.1 : i-2 Series Anti-glare shields
MAINTENANCE
