
SGM
GB
User’s manual 1.02
Giotto 1500
- 54 -
Subnet Mask
Questa funzione permette di definire la SUBNET MASK di Giotto 1500
all’interno della rete ARTNET.
Per impostare l’indirizzo, procedere come segue:
1.
Attraverso l’uso del DIAL cercare il menu “SUBNET MASK1” (e
successivamente SUBNET MASK2, SUBNET MASK3, SUBNET MASK4).
2.
Premere il tasto ENTER. La scritta sul display comincerà a lampeggiare.
3.
Attraverso l’uso del dial è possibile impostare il valore desiderato.
4.
Premere il tasto ESC per confermare le modifiche.
Subnet
Questa funzione permette di definire il parametro SUBNET della rete
ARTNET.
Per impostare il parametro SUBNET, procedere come segue:
1.
Attraverso l’uso del DIAL cercare il menu “SUBNET”.
2.
Premere il tasto ENTER. La scritta sul display comincerà a lampeggiare.
3.
Attraverso l’uso del DIAL è possibile impostare il valore desiderato.
4.
Premere il tasto ESC per confermare le modifiche.
Univers
Questa funzione permette di definire il parametro UNIVERS della rete
ARTNET.
Per impostare il parametro UNIVERS, procedere come segue:
1.
Attraverso l’uso del DIAL cercare il menu “UNIVERS”.
2.
Premere il tasto ENTER. La scritta sul display comincerà a lampeggiare.
3.
Attraverso l’uso del DIAL è possibile impostare il valore desiderato.
4.
Premere il tasto ESC per confermare le modifiche.
PAN-TILT SETUP
1.
Connect Giotto 1500 to the power supply, wait till it has completed reset operations.
2.
Use the DIAL to find the “PAN-TILT SETUP” menu. Press ENTER to confirm.
3.
Use the DIAL to select the menu desired among:
PAN MOVE - PAN POS MIN - PAN POS MAX - TILT MOVE - TILT POS MIN - TILT POS MAX - PAN TILT
SWAP - PAN TILT RES - SPEED CONTROL – SPEED – ACCELLERATION.
4.
Press ENTER to confirm.
Direction of Pan movement
This function allows to decide the direction in which the Giotto 1500
moving head pans indispensable when several fixtures are installed in
order that fixtures installed opposite each other move in the same
direction when they receive a command.
To modify Pan movement, proceed as follows:
1.
Use the DIAL to find the “PAN MOVE” menu and click ENTER. The
message on the display will start to flash.
2.
Use the DIAL to select which of the two available options is required.
3.
Press ESC to confirm.
PAN MOVE=NORM
SUBNET MASK1=0
SUBNET MASK2=0
SUBNET MASK3=0
SUBNET MASK4=0
SUBNET=0
UNIVERS=0