GB
SGM
Giotto 1500
User’s Manual 1.02
- 53 -
Dmx delay
This allows to set for how many seconds the fixture’s last operation
settings are maintained when the DMX signal is missing. This function is
indispensable in those cases in which there is an accidental DMX failure.
To set the required time, proceed as follows:
1.
Use the DIAL to find the “DMX DELAY” menu and press ENTER. The
message on the display will start to flash.
2.
Use the DIAL to select the option desired. If UNL(unlimited) value is
set, the fixture keeps the last operating condition valid independently
from the time of missing DMX.
3.
Press ESC to confirm.
Input signal
This menu is only for reading and allows to verify which type of input
signal is used (DMX, RS232, Ethernet). The signal is automatically
recognized.
To visualize the required signal, procede as follows:
1.
Use the DIAL to find the “SIGNAL=DMX” menu.
2.
The dispaly will show the signal used.
ARTNET SETUP
1.
Connect Giotto 1500 to the power supply, wait till it has completed reset operations.
2.
Use the DIAL to find the “
ARTNET SETUP
” menu. Press ENTER to confirm.
3.
Use the DIAL to select the menu desired among:
IP ADDRESS1 - IP ADDRESS2 - IP ADDRESS3 - IP ADDRESS4 - SUBNET MASK1 - SUBNET MASK2 -
SUBNET MASK3 - SUBNET MASK4 – SUBNET – UNIVERSE
4.
Press ENTER to confirm.
IP Address
Questa funzione permette di definire l’IP ADDRESS di Giotto 1500
all’interno della rete ARTNET.
Per impostare l’indirizzo, procedere come segue:
1.
Attraverso l’uso del DIAL cercare il menu “IP ADDRESS1” (e
successivamente IP ADDRESS2, IP ADDRESS3, IP ADDRESS4)
2.
Premere il tasto ENTER. La scritta sul display comincerà a lampeggiare.
3.
Attraverso l’uso del DIAL è possibile impostare il valore desiderato.
4.
Premere il tasto ESC per confermare le modifiche.
DMX DELAY= UNL
SIGNAL=DMX
IP ADDRESS1=0
IP ADDRESS2=0
IP ADDRESS3=0
IP ADDRESS4=0