SGM 80031501, Руководство пользователя

Страница: 53 / 60

53
Troubleshooting
Problem Potential cause(s) Remedies
Fixture does not respond or appears to be off.
No power to the fixture.
Confirm that the power is switched on, confirm that the
cables are plugged in and the TRUE1 connector is
inserted and turned to its locked position.
The fixture has been turned off.
Press any button on the control panel to turn on the
fixture.
The fixtures batteries are discharged. Charge the batteries by connecting AC power.
Main fuse is blown. Contact SGM support or certified SGM service partner.
Fixture suddenly turned off.
Power was turned off. Check the power supply, switches and breakers.
The fixtures batteries are discharged. Charge the batteries by connecting AC power.
Fixture suddenly stopped responding.
The wireless transmitter or connections, was
disconnected/tampered with.
Inspect the wireless transmitter and connections.
DMX cables was disconnected. Inspect DMX cables.
Fixture operates irregularly / abnormal.
DMX address or DMX mode is incorrect. Inspect and enter the correct DMX address or mode.
DMX cable polarization is inverted (pin 2 + 3). Install a phase-inverter or replace cables.
DMX link is not terminated.
Install a XLR 120ohm DMX termination at the end of
the DMX link.